Product Description
Product Description
sprocket wheel for Brazil market
Motorcycle Sprocket Wheel, Motorcycle Sprocket Set, Chain Sprocket, Motorcycle Parts, Rear Sprocket, Front Sprocket, Cg125 Sprocket, Inner Sprocket, Engine Part, Motor Sprocket, Motorcycle spare Parts, Motorcycle chain wheel, motorcycle chain, Sprocket Wheel, Sprocket
HONDA:
C50, B50, C70, CD70, DAX70, MB80, C90, CD90, S90, H100, C100, C100-BIZ, CB100, CD100, MB100, XL100, S110, CB125, CD125, CG125, TITAN-99, TITAN-2000, TITAN-150, NX125, XL125, XLR125, GL145, CBX150, NXR150 BROS, CBX200, NX200, TRX200, XL200R, CB250, XL250, CBR250, NX250, CBX250, VT250, XL250, NX250, TRX350, CB400, CBR400, NX350SHAHAR, XLX250/350, NX200, XR250, XR200, CB250N, CD100, DAX70, NX400, XR200, XR250, XR200R, GS125
SUZUKI:
A50, GT50, RV50, A80, FR80, DS80, FR80N, RV90, A100, AX100, FB100, FR100, TS100, GP100, ER100, TS100Z, AX115, FD115, CN125, ER125, GN125, GP125, GS125, TR125, AX115, FR100, C70, C90, TS185ER, G7T
YAMAHA:
DT50, GT50, RD50, RX50, YB50, RD75, FS80, GT80, LB80, RX80, V80, YB80, AG100, DT100, DX100, RS100, RX100, YB100, DT125, DT125T, DT125K, DT125R, RD125, RZD125, RS125, SR125, TW125, TZR125, YB125, XT125, YBR125, RD135, RX135, RXZ135, DT150, SR150, DT175, DT180, MX180, RX180, XV250, DT250, SR250, XT250, DT175K 6H, DT175K 4H, TDR250, YZ125, SIGMA100, CRYPTON
KAWASAKI:
GTO125, KAZE-R, GTO110
DAELIM LIBERTY 12T X 44T
ENG DAELIM ALTINO 100 40T
GARELLI ESTR 10T
GILERA SMASH 110 15T X 36T
GUERRERO DAY 100 15T X 38T
GUERRERO FLASH 110 14T X 41T
GUERRERO GLX 14T X 56T
GUERRERO TRIP 110 14T X 36T
HERO PUCH 13T X 33T
INTRUDER/HYOSUNG TN 125 14T
JNG SUZUKI GS/KATANA 125
JUKI DRIB 12T
MIN C/REBORDE 9T
MIN C/REBORDE 10T
N MAX(420) 39T
N MAX 100(420) 15T
RZF200/ANDINA125/RB125/00(77-)/PATAG 14T
TVS 13T X 39T
XX125/RX125/RZA125/SAPUCA125
Z RX/RZA125 44T
ZAN SOL 42T
ZAN XX125 15T
ZANELLA 70(FIRE PLUS) 10T
ZANELLA DUE/POCK 35T
ZANELLA DUE/POCK 38T
ZANELLA XX125/RX125/SAPUCA125
There are many items for Austrialia, Indonesia, Malaysia, Singapore, Thailand, Philippines, India, Turkey, Sri Lanka, West African, South African market and so on.
Your enquiry will be highly appreciated.
Company introduction
DINGJIAN WHEEL Co., Ltd locates in Xihu (West Lake) Dis.qiao Industrial Zone which is renowned for the base of China Motorcycle Sprockets Manufacturing. Our company is a typical manufacturing enterprise with designing, manufacturing and selling as a whole service chain.
DINGJIAN WHEEL Co., Ltd was set up in 1996, covering a total land of 12,000 square CHINAMFG and a constructive area of 8,000 square meters. Under a total investment of 20 million RMB yuan, our company owns the most advanced production equipments, perfect quality inspection system, highly efficient sales and management team and first-class technicians; since we adopt advanced production techniques and superior steel, our products have reached high standard of durability and a series of advanced national level. As our products passed the authentication of global ISO9001 quality system, our company has the power of manufacturing a complete set of sprocket products to fit the needs of motorcycle factories.
Since the founding of CHINAMFG WHEEL Co., Ltd, we uphold consistently the principles of laying full emphasis on needs of consumers, products’quality and commercial creditability; stressing the idea of common business aim, business starting, mutual benefits and developments, for building up Double Win relation with clients;our company has won the trust of a wide range of clients by competitive price and better service, this is why our company obtains better goodwill in this sprocket industry with our products selling well China-wide. and selling far to many regions like South-East Asia. Middle-East. South-America. Africa Europe and so on.
For many years, CHINAMFG WHEEL Co., Ltd insisted on a development policy of Enterprise’ Life Relies on Products’ Quality, we are succeed in fulfilling our famous brand position. DINGJlAN people have confidence in our prosperous development, we will believe in the idea of Brand Relies on Quality, and Effectiveness Depends on Scale. By upholding our development idea, we can achieve our CHINAMFG task of becoming leader in sprockets’ industry by persisting in our quality and management idea permanently. DINGJIAN WHEEL Co., Ltd is expecting your cooperation for mutual benefit producing.
>> Feedback
1.Since your feedback is very important to our business’s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service.
2.Please contact us before disputes or leaving any negative or neutral feedback. We will work with you to solve any problems.Thank you for your understanding!
| Standard Or Nonstandard: | Standard |
|---|---|
| Application: | Motor, Motorcycle, Machinery |
| Hardness: | Soft Tooth Surface |
| Manufacturing Method: | Cast Gear |
| Toothed Portion Shape: | Spur Gear |
| Material: | Stainless Steel |
| Samples: |
US$ 10/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can a motor chain be used in vertical motion applications?
Yes, a motor chain can be used in vertical motion applications. Vertical motion refers to applications where the chain is responsible for lifting or lowering loads vertically. Motor chains are commonly used in various vertical motion systems, such as elevators, vertical conveyors, lifting mechanisms, and overhead cranes.
When using a motor chain for vertical motion, it is important to consider the following factors:
1. Load Capacity:
Ensure that the motor chain has sufficient load-carrying capacity to handle the weight of the load being lifted or lowered. It is crucial to select a chain with a suitable working load limit to ensure safe and efficient operation.
2. Tensioning and Alignment:
Proper tensioning and alignment of the motor chain are critical in vertical motion applications. The chain should be adequately tensioned to prevent excessive slack or sag, which can affect its performance and increase the risk of derailment.
3. Safety Mechanisms:
Implement appropriate safety mechanisms, such as limit switches or overload protection devices, to ensure safe operation and prevent accidents in vertical motion applications. These mechanisms help detect and respond to abnormal conditions, such as excessive load or chain tension.
4. Lubrication and Maintenance:
Regular lubrication and maintenance are essential for the proper functioning and longevity of the motor chain in vertical motion applications. Ensure that the chain is properly lubricated to minimize friction and wear.
5. Compliance with Regulations:
Ensure that the motor chain and associated components comply with relevant safety and industry regulations for vertical motion applications. This includes adherence to standards and guidelines for load capacity, materials, design, and installation.
By considering these factors and following proper installation and maintenance practices, a motor chain can be effectively used in vertical motion applications, providing reliable and efficient performance.
Can a motor chain handle heavy loads?
Yes, motor chains are designed to handle heavy loads in various applications. Here are some factors to consider:
1. Chain Strength: Motor chains are available in different strength ratings, typically measured in terms of their maximum allowable tension or breaking strength. It is important to select a motor chain with a strength rating suitable for the anticipated loads in your application. Chains with higher strength ratings can handle heavier loads.
2. Chain Material: Motor chains are commonly made from high-strength steel or alloy materials that provide excellent durability and load-bearing capacity. The choice of material depends on the specific application requirements, including the expected load, environmental conditions, and any regulatory standards.
3. Chain Design: Motor chains designed for heavy-load applications often have robust construction features to enhance their load-carrying capabilities. These may include larger pitch sizes, thicker plates, hardened components, and precision manufacturing. The design ensures that the chain can withstand the forces and stresses associated with heavy loads.
4. Lubrication: Proper lubrication is essential for motor chains handling heavy loads. It helps reduce friction and wear, ensuring smooth operation and extending the chain’s service life. Adequate lubrication also prevents overheating and corrosion, which can negatively impact the chain’s load-carrying capacity.
5. Sprocket Design: The sprockets that engage with the motor chain also play a crucial role in handling heavy loads. Sprockets should be designed to evenly distribute the load across the chain and provide reliable engagement. Robust and properly sized sprockets ensure that the chain can effectively transmit the heavy loads without excessive wear or failure.
When considering a motor chain for heavy-load applications, it is important to consult the manufacturer’s specifications and guidelines. They can provide detailed information on the chain’s load-carrying capacity, including factors such as tensile strength, working load limits, and recommended safety factors. Proper chain selection, regular maintenance, and adherence to load limitations are key to ensuring safe and efficient operation under heavy loads.
How do you select the right motor chain for a specific motor?
When selecting a motor chain for a specific motor, there are several factors to consider. Here is a step-by-step guide:
1. Determine the motor specifications: Start by understanding the motor’s power rating, speed, and torque requirements. This information will help you choose a motor chain that can handle the motor’s power output and torque demands.
2. Identify the application requirements: Consider the specific application in which the motor will be used. Determine if the motor will be subjected to high loads, high speeds, or harsh environmental conditions. This will help you select a motor chain that is suitable for the application’s demands.
3. Determine the chain type: Motor chains come in various types, including roller chains, silent chains, bush chains, and more. Each chain type has its own characteristics and performance capabilities. Select a chain type that aligns with the requirements of the motor and application.
4. Calculate the chain size: Determine the required chain size based on the motor’s power and torque requirements. Consider factors such as pitch size, roller diameter, and number of chain links. Manufacturers typically provide chain size charts or calculation tools to assist in selecting the right chain size.
5. Consider the environmental factors: Take into account the environmental conditions in which the motor will operate. If the motor is exposed to moisture, chemicals, high temperatures, or other harsh elements, choose a motor chain with appropriate corrosion resistance, temperature resistance, and durability.
6. Consult manufacturer recommendations: Consult the motor manufacturer’s recommendations or specifications to identify any specific requirements or restrictions for motor chains. They may provide guidance on compatible chain types, lubrication requirements, and maintenance recommendations.
7. Evaluate cost and availability: Consider the cost and availability of the selected motor chain. Evaluate factors such as initial cost, maintenance requirements, and the availability of spare parts or replacements.
By considering these factors and conducting thorough research, you can select the right motor chain that matches the motor’s specifications, application requirements, and environmental conditions. It is recommended to consult with motor and chain manufacturers or industry experts for further guidance and assistance.
editor by CX 2023-11-28