Xihu (West Lake) Dis.n Wheel Loader 937H 3TON + 1.7CBM Bucket
(ZL30H Current product)
one. The 937H Wheel loader is quipped with Xihu (West Lake) Dis.Feng CZPT Engine
2. This Wheel loader adopts three CZPT 3 reverse electrical power shift transmission
three. The merged seal cylinder adopted by this wheel loader obtains large seal efficiency and much more trustworthiness
| All round Dimension | |||
| 1 | Size(with bucket on floor) | 7425(mm) | |
| 2 | Width(to outdoors of wheels) | 2305(mm) | |
| 3 | Bucket width | 2462(mm) | |
| four | Peak(To the prime of the cab) | 3095(mm) | |
| five | Wheel base | 2750(mm) | |
| 6 | Tread | 1855(mm) | |
| 7 | Min. ground clearance | 370(mm) | |
| Main CZPT Specification | |||
| 1 | Rated load | 3000(Kg) | |
| two | Running excess weight | 15710KG | |
| three | Rated bucket capability | one.7(m three ) | |
| 4 | Max. breakout drive | 96kN | |
| five | Max. dump clearance | 2850(mm) | |
| 6 | Dump attain | 1030(mm) | |
| 7 | Dump angle at any situation | ≥45 | |
| eight | Min. turning radius | ||
| (one) Outside the house of bucket | 5600(mm) | ||
| (2) Outdoors of rear wheel | 5205(mm) | ||
| 9 | Pivot angle frame | 38 + 1 | |
| 10 | Oscillating angle of rear axle | + eleven o | |
| eleven | Lifting time of bucket | ≤5.one(sec.) | |
| twelve | Lowering time of bucket | ≤3.(sec.) | |
| thirteen | Dumping time | ≤1.one(sec.) | |
| 14 | Traveling speed(Km/h),three CZPT and three reverse | ||
| (one) 1st gear CZPT | seven.3 | ||
| (two) 2nd gear CZPT | fifteen.seven | ||
| (three) third gear CZPT | 35 | ||
| (one) 1st equipment reverse | seven.eight | ||
| (2) 2nd gear reverse | 16.8 | ||
| (three) third gear reverse | 36 | ||
| Diesel motor | |||
| 1 | Model | Xihu (West Lake) Dis.feng CZPT 6BT5.nine-C120 | |
| 2 | Kind | Direct injection. Turbocharged. Water cooling | |
| three | Rated output | 87(KW) | |
| 4 | Inter-bore of cylinder/stroke | 102/one hundred twenty (mm) | |
| 5 | Whole exhaust of cylinder | 5.9 (L) | |
| 6 | Voltage of starting motor | 24(V) | |
| 7 | Rated pace | 2200(r/min) | |
| eight | Max. Torque | 440(N.M)/1500rpm | |
| 9 | CZPTting type | CZPT | |
| ten | Min. specific fuel use | 220(g/Kw.h) | |
