PET flakes pellet machine/pelletizing equipment with ability 200kg/h in manufacturing facility new. The equipment with High-torque twin-screw extruding screw unit, this is a new-technology large-speed, substantial-torque and large-electrical power twin screw extruder realizing technological advertising primarily based on the present merchandise by drawing knowledge from the sophisticated production technology in China.
The advantages of this machine
one. Hugely efficent: the equipment is automatic and with much less electricity use.
two. Particular screw design: We will layout the screw up to customer various materials and the material of screw and barrel can be 38CrMoAL or bimetallic.
three. This equipment can have out perfect viscosity of PET CZPT complicated precystallization dryer method. Only a bit IV will be lowered. It can boost IV in the condition of adding some suited additive.
5. The device wih long life.
other type of these kinds of equipment
|
Model |
TSSK20 |
TSSK30 |
TSSK35 |
TSSK50 |
TSSK65 |
TSSK72 |
TSSK92 |
|
Screw diameter(mm) |
21.seven |
30 |
35.six |
fifty.five |
sixty two.4 |
71.2 |
91 |
|
Rotary velocity(rpm) |
600 |
four hundred |
four hundred/600 |
500/600 |
four hundred/five hundred |
400/five hundred |
four hundred/five hundred |
|
Major motor electricity(kw) |
4 |
11 |
11/fifteen |
37/45 |
55/75 |
ninety/one hundred ten |
220/250 |
|
L/D |
32-40 |
28-forty eight |
32-forty eight |
32-forty eight |
32-forty eight |
32-forty eight |
32-40 |
|
Ability(kg/h) |
2-ten |
five-30 |
ten-eighty |
twenty-150 |
one hundred-300 |
300-600 |
600-one thousand |
Format of the device
A lot more information machine photoes
Crystallization dryer: dryer the PET flakes in progress
Vulume: 1000L.
Heater power: 36kW
Heat way: by electric
Blower energy : 4kW
Mixer electrical power: 2.2kW
Mixer shaft: SS304
Content: Within stainless steel, outside A3, With warm insulation layer.
With the open up door on the hopper, it will be simply function.
Solitary screw feeder For feeding the flakes into the extruder:
Feed the PET flakes into the extruder, single screw feeder, feeding the materials similarly and stably.
Horizontal screw parameter:
Screw diameter:φ60
Electricity:one.5kw
Substance of hopper: SS304
There is sight glass on the hopper, employee can be see the materials in the hopper
Twin screw extruder device
Barrel amount: ten
Size of barrel #1-ten is 234mm
Whole size of barrels: ~2340mm
Barrel #one-nine created of 38CrMoAl material, Hardened to ≥61HRC
The barrel area are cooled with water, each barrel adopts single throttle and solenoid valve, and solenoid valve imported from Italy.
Barrel#1 open up for feeder, Barrel#four: open barrel, for normal degassing, Barrel#six, Barrel#68: open up barrel, for vacuum degassing. The others is shut.
The processing segment is supplied with stainless steel protect as a defense from.
Diameter :62.4 mm L/D: 36:1
Centre length: 52mm
Substance of screw: W6Mo5Cr4V2
Rotating velocity (counter rotating): 400RPM
A pair of screw shafts, full with screw factors, screw shafts substance is 40CrNiMo, Hardened to ≥61HRC
The materials arrive out from the die(pull entice like noodles pelletizing way, PET need to use this pelletizing way. And the its require good vacuum, like roots pump, then the pellets will be a lot much better)
Cooling for the screw( h2o managed by electric powered valves)
Screw components of the machine
Vacuum, we can use Roots vacuum or Bipolar pump.
Degassing on the extruder
Water tank
Content come from the die and go into the water tank for cooling, There is rubber roller in the tank, content strap can be deliver into gale dryer to blower the h2o on its floor.
Length of tank : 4m,
Material of tank is SS304, Substance of bracket :Q235
It Can be moved up and down, CZPT and back up to the die and material necessary.
Electrical power of blower on gale dryer:two.2kW
Pelletizer
A. Portal shaped kind pelletizer,horniness alloy rotary cutter
B. capacity:300kg/hr
C. motor electricity:4KW
D. Cutter diameter: 300mm
E. Blade width: 20mm
F. Traction speed :thirty-90m/min
G. No. of cutter gears: 32
H. Max quantity of lines: considerably less than 60
Ultimate pellets and Uncooked substance
If you want more information of this type of equipment kindly speak to me, I can send you much more depth photoes and vedios.
1. We source below required paperwork with the machine:
- Device structure
- CZPTity diagram
- Equipment certificate
- CZPT manual guide/maintenance guide
2. We offers 1-year high quality ensure. During this period, if the machine’s malfunction is authorized to be our accountability, we will deliver the broken spare areas to you with DHL courier or other way inside seven workdays following getting the complainant. And deliver the professionals to the buyer’s manufacturing unit for maintaining. All fees are in our account.
3. Following 1 yr promise, If you want we can provides payable spare elements and technician’s Browsing servicing, and any damaged spares we can deliver you quickly as attainable.
four. We believe in that our quotation fulfills with your needs and we will gladly furnish you with further info.
five. 24Hours service : Cell-139157 0571 eight
