Electro hydraulic Synchronous CNC Press Brake
Design: KCN-80twenty five
4+1 Axes CNC Management(X,Y1,Y2,R,W)
X: Backgauge front and again Y1,Y2, : Left and correct oil cylinder stroke
R : Backgauge up and down W: Worktable crowning
Primary functions and functions
1.Total welded and processed construction.
2.CZPT hydraulic proportional servo synchronization, ensuring repeated accuracy.
3.Inside 1 stroke, bending stress can be managed at random level, repeatability precision±0.01, parallelism .02.
four. Decrease worktable has crowning gadget to anti deflection & upper tool has wedge compensation unit.
five.Switzerland cybelec CNC management system, grating ruler, CZPT hydraulics, servo motors and other add-ons of renowned manufacturer are installed for best device performance.
six.Ram stroke(Y1, Y2),backgauge (X, R) are managed by CNC controller even though ball screw and linear guide rail mounted for large repeatability precision.
seven.CZPTed ball screw and linear information are used for rear stopper, to make certain the positioning precision of rear stopper, for processing precision of device to be greater.
| NO. | Merchandise | Parameter | Device | ||
| one | Nominal force | 800 | KN | ||
| 2 | Desk duration | 2500 | mm | ||
| three | Max.Slider stroke | 200 | mm | ||
| 4 | Max.Shut height | 460 | mm | ||
| five | Between columns | 2100 | mm | ||
| 6 | Throat depth | thirty | mm | ||
| seven | Principal motor electricity | 5.five | KW | ||
| eight | Down Speed | 180 | mm/s | ||
| 9 | Pressing Pace | twelve | mm/s | ||
| 10 | Return Velocity | 160 | mm/s | ||
| 11 | Management axes | X+Y1+Y2+R +W | / | ||
| 12 | X axes Stroke | 500 | mm | ||
| 13 | X axes Pace | 300 | mm/s | ||
| fourteen | R axes Stroke | 200 | mm | ||
| 15 | R axes Velocity | fifty | mm/s | ||
| 16 | Backgauge Stoppers | 4 | / | ||
| L | 3000 | mm | |||
| 17 | Total dimension | W | 1650 | mm | |
| H | 2350 | mm | |||
| 18 | Device fat | 5600 | kg | ||
Comprehensive Pictures
Large precision electric desk crowning. High-precision grating scale mounted
on C-board.
France Schneider parts, Pedal switch with emergency stop, safe
anti-interference, stable and durable. procedure, the base with rollers easy to go.
CybTouch 8PS CNC controller
Easy Operating:
one. Intuitive user-friendly interface.
2. Simple pages, clear display, large keys.
3. Large, vivid and high-contrast fully touchscreen.
4. Complete programming for efficient mass-production with multiple bends.
five. Easy single bends with EasyBend page.
six. On-line help and interactive warning pop-ups.
7. Comfortable wireless data backup and software updating using PC or Notebook.
eight. Large variety of languages CZPT.
Better Bending:
1. Various automatic calculations of bend functions.
2. Bending sequences and programs can be memorized.
3. Angle, pressure and crowning management.
four. Easy manual movement.
5. Offline 2D software CZPT.
Powerful:
1. Controls 3 axes (with optional 4th axes).
two. 2D graphic profile creation with manual sequencing (choice).
three. Bend allowance calculation.
4. Pressure – crowning calculation.
five. Modular tools for each part or bend.
6. Angle and back gauge correction.
7. Telemaintenance via wireless connection with PC or notebook.
eight. USB port for memory stick for data transfer/backup.
Principal configuration
| Name | Producer |
| CNC controller | CybTouch 8PS Cybelec Switzerland brand |
| Principal motor | Siemens Germany brand |
| CZPTal factors | Schneider France brand |
| Equipment pump | Sunny USA brand |
| Seal ring | NOK Japan brand |
| CZPT technique | Boschrexroth Germany brand |
| Ball screw ,CZPT information | HIWIN ZheJiang brand |
| Grating ruler | GIVI Italy brand |
| Tubing connector | EMB Germany Brand |
| Servo Motor and drive | Delta ZheJiang brand |
The common add-ons are in the below:
- Anchor bolt
- Hex nut
- Seal ring
- Gasket
- Grease gun
- Allen wrench
- Foot swap
- Front support arms
- CZPTal box key, control panel key
- Operation manuals
