Higher Pace brushless Servo Motor With Driver Created
1.Working voltage: DC input voltage 15VDC to 50VDC ,advocate voltage is 36V
two.The max steady output present is 10A, the max peak current is 22A (3 moments overload ability)
three.Satisfactory differential or one-ended pulse / route command, have 3 management method of placement, speed and torqe
four.Using FOC magnetic place management technologies and room vector pulse width modulation (SVPWM) closed-loop management engineering
5.The quantity of pulses per cycle (subdivision) can be established by the debug software program or the dial swap environment(digital gear ratio)
6.Have three types of 90w,130w and 180w DC brushless servo motor to select.
seven.Have safety of overvoltage, undervoltage, overcurrent and tolerance,and so forth.
8.Solitary / double pulse method, the pulse legitimate edge can be pick.
nine.The max pulse frequency of manage instruction is 500KHz (factory default is 200KHz)
ten.Pulse, direction and enable sign input interface degree is four.five to 28V appropriate
eleven.With serial RS232 / RS485 debugging function, but want to use our unique serial debugging cable
twelve.Functionality: sleek velocity, little overshoot ,modest monitoring mistake, reduced warmth of motor and driver
Driver Model And Variety Xihu (West Lake) Dis.
|Vector Maximum Current||16A||18A||22A|
|Body Length(MM)||106.2 0.5||126.2 0.5||146.2 0.five|
|Operation Voltage||fifteen-50Vdc,36Vdc recommend|
|Overvoltage Protection Voltage||68Vdc±2|
|Control Method||32 bits DSP vector FOC control technology|
|Pulse Limit Frequency||500KHz(factory default 200KHz)|
|Security||Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm|
|Input Signal||Pulse, direction and enable differential / single-ended interface signal,
interface level 4.5-28Vdc compatible, no need external current limiting resistor
|Output Signal||Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
|Electronic Gear Ratio||Default 4000 / rev, through the DIP switch or debug software setting subdivision
|Position Error Control Accuracy||±1 Pulse|
|Speed Control Accuracy||±2 rpm|
|Maximum Acceleration||100 rpm/ms|
Dialing Swap Settings
Subdivision accuracy (digital gear ratio) :When SW1, SW2, SW3, SW4 are ON, the generate uses the internal default micro-action subdivision, the default interior subdivision of the driver is 400Pulse / rev, and the electronic gear ratio can also be set by the debugging software. SW5 established the motor route,when turnON, the motor turns clockwise (CW),when turn OFF, the motor turns counterclockwise(CCW). SW6 manage method selection, whenON, the motor enters the self-examination method,creating 1 CZPT and reverse revolution, has been repeated until exit self-examination method, the external management signal is invalid at self examination mode, whenOFF, the motor exits self-examination mode,then the external handle signal is legitimate.
Mechanical Framework Dimension
|Driver mode||Motor body length(mm)||Driver thickness(mm)||Integrated motor driver length(mm)|
Note : All earlier mentioned is usually utilised, and we can customise according to your ask for or select the suitable model for you, remember to notify us pursuing parameters: existing, voltage, keeping torque, human body duration,the application region.
Suitable for all types of small and medium-sized automation equipments and devices. Such as: laser tools, healthcare gear, 3D printer, small and medium-sized engraving equipment, digital processing equipment, computerized crawling tools, special CNC device device, packaging equipment and robot. It is specifically useful for end users who anticipate lower noise and substantial pace programs.
Packaging and shipping and delivery
one.Outer packing: CZPT export carton with essential shipping and delivery marks
two.Internal packing: Watertight packing with shock absorbing EPE and cardboard surrounded
three.As per the clientele requirements
1.Operating time : eight:00 a.m – ten:00 p.m .Any queries, remember to explain to us freely, we will be reply you asap.
2.Direct time : For samples, two to five days will be Alright. For mass creation, the direct time count on the quantities you want.
3.Warrantity period of time : eighteen months and Daily life-long maintenance support for the item.
four.We settle for products customise.
Q1: How to select the appropriate stepper or servo motor?
A1: There are serveral essential things: dimension, length, keeping torque, voltage, existing etc.Following validate them and informed us, we can decide on the suited one for you.
Q2: Any other approaches to finalize the product?
A2: Certain, you can send us the model you are utilizing, we can aid you uncover the suitable 1.
Q3:How to promise the Good quality of CZPT Parts?
A3: We have the built-in system for industrial areas quality manage. We have IQC (incoming quality control), IPQCS (in method top quality control area), FQC (final quality handle) and OQC (out-going quality control) to management each process of industrial areas prodution.
This fall:What’s the Benefit of Your Parts for Market Products?
A4:one.The gain of our items is the aggressive prices, quick shipping and high high quality. Our
workers are accountable-oriented, helpful-oriented,and diligent-oriented. Our merchandise are highlighted by strict tolerance, easy finish and extended support time.
two.Just before we ship out the goods,we check out them a lot more than a few instances.