Substantial productive bucket elevator
Introduction
THG/TDG High Efficient Bucket CZPT is the upgraded from TH/TD bucket elevator. Bucket elevator consists of sprocket/drum, chain/belt, driven device, head section, middle casing and tail section and so on. Higher Productive Bucket CZPT can be broadly employed in many industries this kind of as mining, mineral, chemical, agriculture, electricity, meals and other industries and many others.
Rewards and Attributes
one. Successful bucket elevator device with large capacity, high lifting height.
2. With kinds of buckets, to meet up with the requirement of various kinds of materials.
3. THG bucket elevator adopts alloy metal ring chain, after surface managing and heat managing, moderate hardness, high toughness, far better abrasive resistance.
4. TDG bucket elevator adopts metal wire rubber belt, very good toughness, large strength.
5. CZPT, tail parts and center housing cases with great sealing, no content and dust leaked, with no air pollution.
6. With holdback to stop substance backflow when shut down in an emergency.
seven. Base adopts counter excess weight take-up unit, make itself automated take-up, to keep away from belt track slip or chain just take off.
eight. Enhance velocity handle sensor and mechanical degree detector, it is matched by CZPT.
nine. Motor manufacturer can be domestic or imported: Yutong, Shuangyu, ABB, Siemens, WEG and many others
ten.CZPT brand name can be domestic or imported: C&U, LYC, HRB , WZS, FAG, NSK, SKF etc.
CZPT Parameter:
TDG Belt Bucket CZPT(with Sh bucket)CZPT Parameters Desk | |||||||||||
Main CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
a hundred and sixty | 200 | 250 | 315 | four hundred | five hundred | 630 | 800 | 1000 | 1250 | 1600 | |
Capacity Q(m³/h) | 32 | 45 | 72 | one hundred and one | 158 | 220 | 348 | 492 | 788 | 1.22 | 1541 |
Bucket Quantity /L | two.six | 4 | 7 | 10 | sixteen | twenty five | 40 | 64 | 102 | 161 | 255 |
Pitch of Buckets /mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Bodyweight of traction belt&bucket per meter(kg/m) | 22 | 21.five | 33 | 33.2 | forty two.two | 62.3 | 78.fifty three | 106 | 145 | 155.five | 223 |
Running Velocity v/(m/s) | 1.two | one.two | 1.34 | 1.34 | 1.5 | one.5 | 1.68 | one.65 | one.86 | 1.86 | 1.836 |
Lifting height max/m | 80 | eighty | 80 | 80 | eighty | 80 | 80 | eighty | 80 | 80 | 80 |
Observe:the capacity in the table is calculated according to seventy five% of the fill element. |
TDG Belt Bucket CZPT(with Zh bucket)CZPT Parameters Table | |||||||||||
Major CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
160 | two hundred | 250 | 315 | four hundred | 500 | 630 | 800 | one thousand | 1250 | 1600 | |
Capacity Q(m³/h) | 24 | 31 | fifty one | 74 | 118 | 167 | 253 | 361 | 571 | 816 | 1112 |
Bucket Volume /L | one.9 | two.nine | four.six | 7.4 | twelve | 19 | 29 | forty seven | 74 | 117 | 184 |
Pitch of Buckets /mm | 260 | three hundred | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
Bodyweight of traction belt&bucket per meter(kg/m) | 22 | 21.5 | 33 | 33.2 | forty two.two | 62.3 | 78.53 | 106 | a hundred forty five | a hundred and fifty five.5 | 223 |
Operating Pace v/(m/s) | 1.two | one.two | one.34 | one.34 | 1.5 | 1.5 | one.68 | one.65 | one.86 | 1.86 | 1.836 |
Lifting height max/m | eighty | eighty | 80 | 80 | 80 | eighty | eighty | eighty | 80 | 80 | 80 |
Note:the capacity in the desk is calculated in accordance to 75% of the fill aspect. |
THG Bucket CZPT(with Sh bucket)CZPT Parameters Table | |||||||||||
Primary CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
a hundred and sixty | 200 | 250 | 315 | four hundred | five hundred | 630 | 800 | one thousand | 1250 | 1600 | |
Capability Q(m³/h) | 30 | 50 | 70 | 100 | 160 | 210 | 350 | 475 | 715 | 1120 | 1550 |
Bucket Quantity /L | 2.6 | four.1 | 6.5 | 10 | 16 | 25 | 40 | 64 | 102 | 161 | 255 |
Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
weight of traction chain & bucket per meter(kg/m) | 31 | 31.85 | 33.four | 43.25 | sixty.9 | seventy nine.6 | 88.66 | 107 | 150 | 187.6 | 233 |
Working Velocity v/(m/s) | 0.ninety three | .93 | one.04 | 1.04 | 1.17 | one.17 | one.32 | 1.31 | one.47 | 1.47 | one.47 |
Lifting top max/m | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 55 | 55 | 40 | 40 |
1. Filling issue ψ=1 2. Bucket quantity=Volume of complete h2o three. Greatest lifting height = axis length of bucket elevator |
THG Bucket CZPT(with Zh bucket)CZPT Parameters Desk | |||||||||||
Principal CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
160 | two hundred | 250 | 315 | four hundred | five hundred | 630 | 800 | 1000 | 1250 | 1600 | |
Ability Q(m³/h) | 21 | 33 | 45 | 74 | 120 | 160 | 250 | 345 | 520 | 810 | 1110 |
Bucket Volume /L | one.9 | 2.9 | 4.6 | 7.4 | 12 | 19 | 29 | 47 | 74 | 117 | 184 |
Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
excess weight of traction chain & bucket per meter(kg/m) | 31 | 31.eighty five | 33.four | 43.25 | sixty.9 | 79.6 | 88.66 | 107 | 150 | 187.6 | 233 |
Managing Speed v/(m/s) | 0.93 | .93 | 1.04 | one.04 | 1.17 | 1.17 | one.32 | 1.31 | one.47 | one.47 | one.47 |
Lifting height max/m | 75 | seventy five | seventy five | 75 | 75 | 75 | 75 | 70 | 70 | 55 | 55 |
1. Filling issue ψ=1 2. Bucket volume=Volume of entire drinking water three. Optimum lifting top = axis distance of bucket elevator |
Assortment Conditions
♦Material to be processed: _____ | ♦Material is corrosive or not: ____ (Ps. Indeed or No) |
♦Handling capability (Ps. It indicates the whole | ♦Working environment is indoor or out of doors:________ |
substance capacity feeding from the inlet): _____t/h | ♦Material is liquid or not:___________(Ps. Sure or No) |
♦Bulk Density: _____t/m3 | ♦Working surroundings temperature: _______ ºC |
♦Lifting peak of the elevator (distance in between | ♦Upstream tools (Ps. It signifies what variety of |
inlet and outlet):__________m | gear is employed to feed the substance): _____ |
♦Max. granule size of the feeding materials: ____mm | ♦Downstream gear (Ps. It implies what sort of |
♦Percentage of Max. granule in substance:_________% | tools is utilised to discharge the materials): _____ |
♦Material temperature: _____ºC | ♦Working electricity supply: _____V ______HZ |
♦water articles:____% |
We mostly offer the pursuing gears :
Vibrating Screen | Rotary vibrating screen |
Ultrasonic vibrating display screen | |
Gyratory display | |
Trommel display | |
CZPT vibrating display | |
Round vibrating display | |
Dewatering monitor | |
Vibrating feeder | |
Belt CZPT | Belt conveyor |
Sidewall belt conveyor | |
Transportable belt conveyor | |
Shuttle conveyor | |
Tripper | |
Bucket CZPT | Successful bucket elevator |
Belt bucket elevator | |
Ring chain bucket elevator | |
Plate chain bucket elevator | |
Cement bucket elevator | |
Silo bucket elevator | |
Screw CZPT | U-sort screw conveyor |
Cement screw conveyor | |
Pipe screw conveyor | |
Scraper CZPT | Horizontal scraper chain conveyor |
Incline scraper chain conveyor | |
Grain scraper chain conveyor |