Flexible Round Polygonal Interlock Exhaust Pipe Making Machine

Flexible Round   Polygonal Interlock Exhaust Pipe Making Machine

Exhaust Pipe Interlock Versatile Steel Hose Making Machine

one. Solution Specifics

What can our machine generate?

1. Round Interlock Hose (2S & 3S)
two. Polygonal Interlock Hose (2S & 3S)
3. Interlock Hose with Yarm
four. Vehicle / Boat Motor Flexible Exhaust Pipe

2. CZPT Parameter

a. Machine No.one:

Equipment Sort CF-150
Offered Condition Spherical or polygonal with various forming dies
Size assortment ID38-150
Forming speed one hundred fifty-350m/8hrs
Strip thickness .twenty five-.5mm
Strip width 16 and 20mm
Electricity 4KW
Outer proportions 3500mmX1200X1600mm
Weight 950kgs

b. Equipment No.2:

Equipment Type CF-300
Obtainable Condition Round or polygonal with diverse forming dies
Dimensions variety ID150-300
Forming speed 100-200m/8hrs
Strip thickness .twenty five-.8mm
Strip width sixteen,20, 28, 32mm
Electricity 11KW
Outer proportions 3500mmX1200X1600mm
Fat 1200kgs

c. Other Types’ Parameter


Generating dimensions/mm ID38-150 ID75-300 ID200-four hundred ID38-sixty five
Speed M/H one hundred-120 a hundred and fifty-400 one hundred-a hundred and twenty 150-four hundred
Strip size /mm sixteen-twenty*.twenty five-.five 20*.45m 28*.five-.eight 15*.25
Sort Polygonal Spherical round polygonal

three. Machine Instruction

Principal: the machine included superior technologies, the universal wheels and four pairs of forming wheels will be applied to sort the hose step by phase. The size of the interlock hose will be same as forming mold.
one. Seven pairs of wheels are all transmission wheels (refers to wheel drawings), the 1st pair of wheel is positioning (refers to wheel drawing 001).They can not be pressed way too difficult to prevent as well quickly feeding.The allowable tolerance in the two sides can not be a lot more than .3mm. The 3rd pair are folding wheels(refers to drawing three),the folding degree of asymmetry will not be far more than .3mm. The fourth pair folding & shaping wheel(refer to wheel drawing 004), the strip will be folded and shaped to be 90° angle. The fifth pair (refer to drawing five) will make 90° angle strip 60° angle.
two. Soon after the strip goes through seven pairs of wheels, wind and correct the strip on the forming mould, and then push the slot step by phase with seven pressing wheels. Operate the device little by little until the proper hose arrives out.
3.The transmission wheels have been modified before shipping from the manufacturing unit.

When modifying the 4 middle pressing wheels, make sure you observe: the 1st pair can not be as well restricted, then the second will be tighter than 1st, the other will be by the same way.
The turning course of center pressing wheels:

Adjusting Process:
The seven pairs of wheels(one-7) will be positioned with spacers, the upper wheel must be in the identical center line with reduced wheel, do not fix them. There are spacers within lower wheels which have been modified before delivery. The spacers outside the house the wheels will be pressed by the nuts. The spacers of various thickness will be employed to make confident the reduce wheel just in the middle of the strip and both sides folded equally. The five pairs of wheels must be pressed down parallelly with identical power. Make sure the strips are not damaged when urgent down the wheels.
Never fasten the nuts on the urgent equipment to keep the spring inside of can shift freely.
You need to have to set gasket when it is essential to make limited interlock hose.
When alter the transmission wheels, it is necessary to loose all wheels, and then enable the wheels drop down freely and then fasten.
Preserve the length among pressing wheel assist and the large plate of the device one.5mm one particular than an additional clockwise.(for 3-s equipment, it will be 1.0mm)

  1. Insert the grease in the chain wheel and chain before begin-up and keep the shaft and chain are greased appropriately.
  2. Operate the device with uniform pace, by no means accelerate or reduce the speed all of a sudden. When begin up the equipment, the velocity should be significantly less than 400r/min and max. pace must not be far more than 800r/min.
  3. Minimize off the electricity supply when the device is not operating.
  4. Fasten the nuts on the wheels and stop them from sliding and preserve verify to make sure.

4. Firm Overview

Comflex CZPT Co.,Ltd

We supply all varieties of machines related to hoses, bellows, and cloth enlargement joints with more than 35 several years. In the meantime, we can also layout and manufacture particular products in accordance your unique necessity. Our devices have been exported to many countries, this sort of as Ukraine,Russia, Viet Nam, India, Canada, Australia, Italy, France, United kingdom, Turkey, and so on.. We assure you long-term mutual beneficial cooperation partnership!

five. Application

Exhaust hose producing device are broadly employed to manufacturing exhaust pipe or flex connectors for the truck. When compared with interlock ASS hose, the 3-s hose has the subsequent characteristics:

  • Reduced leakage
  • Better sealing overall performance
  • Flexible
  • Exhaust connector, Exhaust pipe for the truck.
    CZPT versatile metallic hose generating.
  • SS & sss type, spherical & polygonal kind




Produce speed/hr

Strip size(width*thickness)











two hundred




one hundred fifteen












one hundred



45,fifty one,55mm 











six. Packing & Shipping and delivery

seven. CZPTer Go to

eight. Certification

FAQ for interlock hose making machine

Q:Why choose us as your supplier?
A:We are most professional in flexible conduit making machine with more than 30 Years’ experience

Q: What can you supply for flexible conduit making machine?
A: Interlock hose making machine
    Squarelock hose making machine
Q:What sizes you machine can make?
A: Interlock Hose:ID3-ID450 on different machines

We need to know the following information to quote you correct machinery:

Q:What type of flexible conduit you need?
A:For instance, square lock or interlock hose, please send us profile drawing or picture to us.

Q:Hose size range
A:Such as:DN8-DN200

Q:Material of hose
A:Such as: Stainless steel (304,316L)/Galvanized steel

Q:Product type
A:Spherical/Polygonal interlock hose

Flexible Round   Polygonal Interlock Exhaust Pipe Making Machine